When you turn on your furnace in the fall, you might notice a noise that wasn’t there last winter. Whether you’re hearing a rattling sound or your furnace makes a loud bang when it turns on, it’s important to fix the problem before it gets cold outside. In many cases, a quick repair can help prevent a small issue from growing into a big (and expensive) problem in the middle of winter.

Why Should You Address Furnace Noises in the Fall?

Fall is the perfect time to schedule an inspection and find the source of your strange furnace noises. Furnace technicians aren’t as busy as they are in the winter, so it’s often easier to get an appointment. And because the temperatures are milder, you can still stay safe and comfortable if your furnace is out of commission for a few hours or days.

Why Does My Furnace Make a Loud Bang When It Turns On?

A loud bang when you first turn on your furnace in the fall can be alarming. Usually, the noise has one of two causes:

  • Ductwork: If your furnace makes a loud bang when it turns on, the noise could be coming from your air ducts. This can happen as the high air pressure pushes out the sides of the duct. And if the metal ducts are cold when you turn on the heat, the warmth can expand the metal and create a banging sound. Expanding ductwork near the furnace can also cause a popping sound.
  • Delayed ignition: If your furnace uses natural gas, a loud bang may mean the burners aren’t igniting promptly. This delay allows gas to accumulate, and when the burners finally light, the built-up gas burns quickly with a loud bang.

The timing and location of the sound can offer clues. Multiple metallic bangs throughout the house may come from the ducts. One loud bang at the furnace during startup could signal delayed ignition. Turn off the furnace and call a technician before restarting it.

When a banging noise is due to delayed ignition, it could be caused by:

  • Corrosion
  • Broken components
  • Damaged electrical connections
  • Dirty burners and burner orifices
  • Blocked or damaged air intakes, exhaust flues and vents
  • A poorly aligned burner or igniter

After your furnace has been sitting unused throughout the spring and summer, all these issues are possible. A technician can inspect the furnace and determine whether emergency furnace repair is necessary. If you ignore the sound, repeated delayed ignitions can damage the heat exchanger and cause your heating system to fail midwinter.

Other Common Furnace Noises

A bang at startup is just one of the noises you might hear from your furnace. Here are a few other common sounds that need your attention while you’re preparing your HVAC system for winter.

Squealing

A squealing or screeching sound coming from the furnace often happens in one of three spots:

  • Fan belt: A loose or fraying belt doesn’t have enough tension, so it can make a squealing sound as it moves. This is only an issue if you have an older furnace, as newer models don’t usually have belts.
  • Motor: Squealing or squeaking coming from your blower or inducer motor is usually caused by parts that are rubbing against another surface. The bearings are often the culprit, especially if they’re old or lacking lubrication. A technician can lubricate serviceable bearings, but sealed bearings may need replacement.
  • Fan: Dust and grime on the blower fan can throw the blades off balance and cause vibration. Professional cleaning of the blades may help.

If your furnace is making a squealing noise, schedule a professional to give the furnace a tune-up.

Rattling

A rattling sound in a furnace usually happens when a part is loose or failing. With the furnace turned off, check for loose exterior-panel screws or visible ductwork connections. Leave internal fasteners to a technician.

If the rattling is loud enough to hear from another room, turn off the furnace and have a technician inspect it. Possible causes include a failing inducer motor, loose blower components, or dirty or damaged fan blades.

Hissing or Whistling

Hissing and whistling sounds usually happen when gas or air is being forced through a tiny space. This can happen if the air filters are dirty or there’s a hole in a duct.

A gas leak can also hiss as gas escapes through a hole or crack. Warning signs of a gas leak, combustion problems, or carbon monoxide exposure include:

  • You smell rotten eggs
  • You notice a yellow or orange burner flame, which may indicate incomplete combustion
  • You experience headaches, dizziness or nausea, which may indicate carbon monoxide exposure

If you suspect a gas leak or carbon monoxide exposure, leave immediately. Don’t use switches or a phone indoors. From outside, call 911, then your gas utility or supplier if you suspect a leak. Don’t reenter until responders say it’s safe.

Who to Call About Fall Furnace Noises

If your furnace makes a loud bang when it turns on or you’re hearing another type of noise, you don’t have to handle it on your own. At Anderson Heating, Cooling, Plumbing & Electric, we can locate the cause of the sound and repair your furnace before winter starts. Call us today to schedule an appointment; for emergencies, we also offer 24-hour furnace repair.

Meet the Author
Tara Plogsted
Tara Plogsted

company icon